设为首页  |  加入收藏  |  联系我们
   
  地址:上海市闵行开发区
  电话:021-64099929/18916291885
  手机:
  邮箱:13918969943@163.com
  QQ:381589914
 
POWERPLUS™ II 500
来源:  作者:  浏览次数:1083  发表时间:2010-05-20
 
  【 字体: 打印本页 | 关闭窗口  

产品名称:POWERPLUS™ II 500 CO2/MAG/MIG焊机
产品说明:

POWERPLUS™ II 500 是恒压直流弧焊电源。该机能产生极佳的输出特性、良好的焊缝表面和稳定的电弧。

POWERPLUS™ II 500 是坚固耐用和稳定可靠的焊接电源,特别设计用于船舶、重型钢结构等较为苛刻的应用场合。

POWERPLUS™ II 500 为熔化极气体保护焊包括药芯焊丝焊接而设计。当使用纯CO2或氩气混合气体作为保护气体进行焊接时,能产生优良的恒压直流焊接输出特性,并且特别为低碳钢、不锈钢、铝的焊接应用而优化。

POWERPLUS™ II 500 的前面板配有可调节的开关,包括2步/4步开关模式选择、收弧电压及收弧电流设定等。主PC板上独立的DIP开关能为焊机带来先进的特性。这些DIP开关具有控制预送气、起始填弧坑模式、填弧坑重复模式、回烧、慢送丝以及长电缆焊接电压降补偿功能。

POWERPLUS™ II 500 可与林肯电气PWF™-2,
PWF™-4,PWF™-2 Plus,PWF™-4 Plus半自动送丝机配合使用。

优点
• 全程输出控制——稳定、精确的设置,确保产生完美的焊缝
• 数字式电压和电流表,便于输出操作的精确读数
• 可调节的焊前预送气体——保护气体预送,确保在焊缝的开始端不会产生气孔
• 可调节的焊丝回烧时间——确保良好的二次起弧
• 可调节的起弧前送丝速度——提供更可靠的起弧,确保起弧处焊缝清洁及成形美观
• 可调节的收弧控制——在任何焊接条件下收弧焊缝均能获得较高的质量
• 2/4步控制——带给操作工先进的焊接控制,使焊接操作更加简单和出色
• 密封的PC板——在恶劣的环境中确保PC板具有较长的使用寿命
• IP23 防护等级——高防护等级确保其在恶劣、苛刻的环境条件中具有较长的使用寿命
• 电缆压降补偿功能——能够补偿最长达60米的电缆的压降损耗
• 采用最新的节能技术——激活该特性后,POWERPLUS™ II 在待机状态下能节省大量的能耗,从而节约生产成本
工艺
MIG/MAG/CO2焊   药芯焊丝焊

重量尺寸

净重:175公斤
外形尺寸(毫米)高x宽x深:755x505x570

焊接技术参数
产品名称 产品编号 输入电源 额定输出
电流/暂载率
额定输出时输入功率(KVA)                           输出范围
POWERPLUS™ II 350 K60039-2 380V-415V(±10%)/ 3Ph/50Hz/60Hz 500A@60%
390A@100%
 25@60% 17-39V
60-500A

POWERPLUS™ II 500
CV Welders

POWERPLUS™ II 500 is a CV DC power source. This machine produces excellent output characteristics, weld appearance and a very stable arc.

POWERPLUS™ II 500 is the rugged and reliable power source used for demanding environment such as shipbuilding and heavy steel construction sites.

POWERPLUS™ II 500 is designed for GMAW and flux-cored arc welding. Outstanding CV welding performance is guaranteed when using either pure CO2 or Argon mixed gas. The output characteristics are optimized on welding mild steel, stainless steel, aluminum or alloys.

The front panel of the POWERPLUS™ II 500 is equipped with optional selections such as 2-step/4-step trigger control, crater voltage/current settings. Advanced features are set with individual DIP switches on the main PC Board. These DIP switches control pre-flow, initial crater output, repetitive crater output, burnback, run in speed and voltage drop compensation for long welding and work cables.

POWERPLUS™ II 500 can be equipped with Lincoln Electric PWF™ -2, PWF™ -4, PWF™ -2 Plus and PWF™ -4 Plus semiautomatic wire feeders.


Advantage Lincoln
• Full range control over output -- Smooth and precise settings to ensure perfect welds.
• Digital voltage and amperage meters, output voltage and amp reading for easy operation and precise control.
• Adjustable "Burnback" of welding wire -- Gives the operator control, to ensure clean weld starts.
• Adjustable "run in" wire speed -- Gives the operator greater accuracy in starting the weld cleanly and consistently.
• Adjustable "crater" control -- Gives the operator control over welding conditions at the start and ending of welds to ensure higher quality.
• 2 step and 4 step trigger control -- Gives the operator control over advanced welding features that make welding easier and technically superior.
• Potted PC Board -- Ensures long life in harsh conditions.
• Built to IP23 classification -- POWERPLUS™ II is designed for long life in harsh and demanding environmental conditions.
• Cable Drop Compensation -- Compensates for voltage drop when using long interconnecting cable up to 60m.
• Fitted with latest technology, "Power-thrift". -- When activated, POWERPLUS™ II is capable of saving considerable amounts of input power.
Processes
• MIG/MAG
• FCAW-GS/SS

Physical Specifications
Weight: 175 kgs.
Dimensions (mm) H x W x D : 755 x 505 x 570

 
包装设备 封箱胶带 阿里巴巴 百度
CopyRight © 2008-2010 上海通鲁机械设备有限公司 toglu.com All Rights Reserved
咨询热线:021-61519986 沪ICP备09073702号 技术支持:通鲁机械